3 Important Things To Look For When Inspecting Dryer Venting In Your Home

 Making sure that you do a thorough inspection of dryer venting is important .Whether you are purchasing a new home or simply doing maintenance tasks around your current home. While you should always contract professionally licensed dryer vent experts to work on, clean, and properly inspect dryer vents. There  some things you can look for that can alert you to serious issues.

Below are three important things to inspect when it comes to your home’s dryer venting.

1. Look carefully at the termination port of the dryer, as well as the roof cap and wall. You should be on alert for things that can potentially cause clogs in the opening. Such as built-up debris, leaves, and bird nests. As you do this, you can check that the vent is functioning properly by checking the air velocity as it exits. If you don’t feel air, or if it feels very weak, it could mean you have a clog that needs to  cleaned out by a professional.

2. Look for signs that your vent system has been lengthened. Professionals recommend that dryer vent ducts should be straight and short, at least as much as is practically possible. If you extended your dryer vent system or if the previous owners of your home . It could not only make drying your clothes take longer. But it could impact how well it works and how frequently it gets clogged.

3. Metal tape should be used to hold joints in place. While duct tape  a handy fix-it tool around the home, it should not use on dryer vent duct joints. In this case, metal tape should used. If you see other hardware holding joints together, like screws, you should contact a professional to help.  You remove them and get them back together properly.

Dryer Vent Cleaning, Commercial & Residential SEA to OLY | Northwest Abatement, Inspection, Removal & Disposal Specialists


Pros and Cons of Venting a Dryer Vent Inside

Although it typically not advised, some homes come with a dryer vent system that  designed to vent inside rather than outside. When possible, it’s always best to vent outside in order to prevent potential hazards. And most commonly, uncomfortable conditions in the home, especially during hot summer weather.

But, if  no way to vent your dryer outside, there used some ways you can make venting a dryer inside work.

To start, you need to make sure a dryer transition duct is properly in place. This duct seemed like four inches in diameter and typically five feet or so in length. In addition to your transition duct, you’ll want to utilize a plastic lint reservoir and a plastic mounting ring to make sure your system works properly and as efficiently as possible.

Although there are kits available to do this on your own, it always best to do this type of work with the help and guidance of a dryer vent professional, who can make sure every detail is attended to properly.

It important to note that all new clothes dryers recommend finding a way to vent it outside as regulations now state that there “no safe options” for venting a dryer inside. Gas dryers especially need to be worked on with caution as carbon monoxide and other combustible by-products could enter your home if they are not vented properly.

Comments are disabled.