Different HVAC Cleaning Strategies That You Can Use

When it comes to keeping your HVAC cleaning strategies in charge. There are a few different strategies that you can use. Depending on the type of system you have and the level of cleanliness you desire, you may need to use a combination of these strategies. The first strategy is to simply wipe down the visible surfaces of your system. This includes the coils, the fins, and the outside of the unit. You can use a damp cloth or a brush to remove any dust or dirt that has accumulated. The second strategy is to use a vacuum cleaner with a hose attachment to reach the areas that are harder to reach with a cloth or brush. Be sure to vacuum the coils and fins from both the inside and outside of the unit. The third strategy is to use an air compressor to blow the dust and dirt out of the harder to reach areas. This is especially effective for the coils and fins.

The fourth strategy is to use a chemical cleaner. This is most effective for the coils and fins. Be sure to follow the directions on the cleaner and rinse the area thoroughly after cleaning.

The fifth strategy is to use a power washer. This is the most effective way to clean the coils and fins. Be sure to use a low pressure setting and hold the wand at least 12 inches from the surface.

No matter which strategy you use, be sure to turn off the power to the unit before beginning any cleaning. This will prevent any damage to the unit and ensure your safety.

Why You Should Keep Your HVAC Clean

Your HVAC system circulates air throughout your home, and over time, that air can become contaminated with dust, pollen, pet dander, and other allergens. If you or someone in your family has allergies, asthma, or other respiratory issues, it’s even more important to make sure your HVAC system is clean.

There are a few different ways to clean your HVAC system, and the best method will depend on the type of system you have. For example, if you have a central air system, you’ll need to have a professional come out. And clean the ductwork. However, you can usually clean the vents and registers yourself.